Possible Door Badge after Paint

Chevy Luv Spare Tire Chain Paint

I had some extra paint left over so I hit the spare tire chain..:)

Unsightly rear end? Then Hack it!

Well I finally got tired of looking at those ugly steel bumper mount arms that someone had welded on the Luv so it was time to chop those puppies off. I snagged a hack saw at Target for $3.00 and came home and took care of the unsightly arms. It took me 1 hour to hack though 1/4 inch steel but I got them off. Cleaned up the remainder up under the truck and hit it with some flat black Rustoleum....looks way better! Who says that a hack saw and a little brute force can't take care of a problem??? ....Pictures of the crime scene....

Always another project..1930s bakelite steering knob

Finally found a cool bakelite steering wheel knob which will fit the Luv. It needs some restoration on the base metal so I will have to take care of that before I install. I am going to sand all the surface rust off and then most likely paint the base black. I like the butterscotch looking knob...nice! This is a before picture....resto pics coming soon!

Major Buffing on the Front

I was looking at the front end and cab paint today and decided to buff it with a high speed orbital polisher and hit it with some polish wax and what a difference it made! I thought I would have to repaint the entire truck but after completing this task I am pleased with the results. The only panels I will have to repaint on the Luv are both exterior sides of the bed and the passenger side front fender...that will save me a fortune! I do not care if the paint does not perfectly match....it is not a show truck...just want to make it look better and functional...Thumbs up!!!!

Repainted Rear Leaf Springs

I sanded the rear leaf springs down and hit them with some flat black rustoleum paint...they look much better now!

Inspiration Picture..I like it!

This is just a neat rig all the way round...:)
I like the graphics on the side and may do something like this on the Luv doors...maybe.

Old Toyo Tire

Does anyone know the date this tire was produced?...old Toyo Tire which is being replaced with a NOS Broadway tire. The tire is no good..will no longer hold air...dry rotted!

Vintage Truck Magazine

Great Magazine! Check it out!

2nd Spare Mount

I might mount an extra spare tire standing up in the bed right behind the driver...other side in the picture from where the tire currently is. I have sourced a spare tire bed mount from a '55 Jeep truck and might use it to mount an extra spare. I will have one spare under the truck and one in the bed. I like it....its different! :) This is a picture of what it might look like.

Dash Ignition Fixed!

Got it fixed...works great!

Dash Ignition Fixed

It was time to fix the ignition tumbler. It looked as though someone had disassembled it at one point in time...go figure??? I sourced another ignition switch and it came the wiper switch and housing to boot! Here is an disassembly picture of the extra parts.

Classic Truck Magazine

Fairly good information in Classic Truck Magazine..check it out...:)

If you cant find it..Make it!

For those who are missing that pesty little spare tire crank down arm....here are the measurements to make your own.....

Pictures of the Wide Broadway Whitewall Tire soon to be on spare rim

Here are a few shots of the wide Broadway whitewall tire soon to be mounted on my freshly painted and cleared stock rim.

Lots of cleaning up underneath the Luv

I have been busy with sanding and respraying the underneath of the Luv with flat black rustoleum paint...it needed it! This is the after...

Front of Wheel Shot

HEre is a picture of the front of the wheel after loads of sanding, finishing, and re-spray of Rustoleum white. I didnt worry about the old rotted out tire as that will be taken off anyways and a 3 inch white wall installed. Looks better!

Funny Picture...how the spare tire holds air is beyond me

:) Check the massive splits and the tire rot! Anyone have a 14" tire they need to get rid of? :) I need one...:)

I did it my way!!!!!

After about 2 hours of work...Presto!!!! The spare wheel redone! Looks dern near factory...YEP!

I did it my way!!!!!!

I took the spare tire out from under the Luv to continue my frame work and the spare look horrendous. I took the old wire wheel to it and hit it with some white wheel paint that I have had on the shelves forever! This is the before picture...

Removing a Luv Bed

For all those trying to figure out where the mounting bolts are to remove the Luv bed...check out the PDF in the following link. If you want to freshen up your bed frame then taking it off is an option although I am just leaving my own...not trying to make it perfect...just make it look and function better.

http://www.luvtruck.com/pdf/frame.pdf

Working the Frame

Cleaning up the Luv frame some with Rustoleum flat black..lots of sanding here to get the surface clean. Not perfect but looks 100% better! Sorry for the picture...it was hard to get a decent shot with my camera.

Ash Tray Resto

The front of the ash tray needed a fresh coat of paint on it since it looked all dried up...I painted it with a can of OEM return to black vinyl paint.....PRESTO! Looks brand new and blends in with the rest of the dash now. :)

After rear axle is painted

Sanded, sanded, sanded the rear axle with a sanding block to remove dirt and light scaly rust....then hit it with some flat black rustoleum...looks way better. I decided that I am going to repaint the entire frame underneath since it is easy access and since it would look much better than the faded scaly brown it is now. Check out the rear axle...

Rusty Crusty rear end

NEw Project.....I a tired of looking at my crusty rear axle since the rear bumper is missing so I decided to repaint it with some flat black rustoleum. Here is a before shot.

ChevyLuv.Com

For those interested...a wealth of Chevrolet Luv resto and keepin em on the road info site...

ChevyLuv.com

Vintage Kraco Box Speakers

Snagged a set of vintage FX95 Kraco box speakers for the Luv...they work great! Old School Audio! :)

Aftermarket Antenna Install

Well I finally got tired of looking at the vacant antenna hole on the front right fender so I bought a cheapo exterior antenna to cover it up...it is completely non functional as I already have the Luv wired for a wireless antenna inside the dash. I cleaned up the original mount, installed the base, then slapped on the antenna mast..PRESTO!